The Islands of the Fraternal Order of Moai
http://www.fraternalorderofmoai.org/huimalu/

My 1967 Honda S800
http://www.fraternalorderofmoai.org/huimalu/viewtopic.php?f=26&t=14689
Page 1 of 1

Author:  foredeckape [ Mon Aug 06, 2012 2:40 pm ]
Post subject:  My 1967 Honda S800

Way back in the days when Nixon was in the Whitehouse, there was a whole lot of military travel across the Pacific. Many of the aircraft were empty on the trip back. Some pilots and crews stuffed motor cycles, velvet paintings, and small sports cars into the empty aircraft and ships. This one came over from Okinawa with the US Marines. My Dad picked it up in the mid seventies. I rebuilt the engine as a teen and drove it as a "Sunday car" until I moved out on my own.

791 cc water cooled DOHC inline 4 with a roller bearing crank shaft. Redlines at 12,000 rpm (search youtube to hear the sweet sound).
4 speed, short throw manual transmission.
This one has a live rear axle. the 600's (Jay Leno's) and the early 800 had chain drive.

Arriving from my Dad's California Garage 30 years after I parked it. The Spawn likes it:

Attachment:
IMG00151-20110818-1111.jpg


Since the truck couldn't make it on to my street, I had to tow it to the house:
Attachment:
IMG00157-20110818-1318.jpg


Yes, it is that small.
Attachment:
IMG00160-20110818-1345.jpg

Author:  foredeckape [ Mon Aug 06, 2012 2:48 pm ]
Post subject:  Re: My 1967 Honda S800

I outsourced the refreshment. My garage space is not suited for a multi year project.
Off to Middletown New York
Attachment:
IMG00233-20111120-1517.jpg


The leak down test showed a flat cylinder. All that was left of the coolant was glycol crystals. The rubber dust covers on the ball joints are dust. All the hydralics need to be rebuilt. Of course, these parts aren't stocked in the US since American Honda never brought these cars into the country. So, I can't open the phone book and buy a rebuilt master cylinder but have to reverse engineer and manufacture what can't be found as NOS in Japan.

Author:  foredeckape [ Mon Aug 06, 2012 2:52 pm ]
Post subject:  Re: My 1967 Honda S800

I can still fit in the driver's seat, really.
Attachment:
IMG00148-20110818-1102.jpg

Author:  Professor Pineapple [ Mon Aug 06, 2012 4:01 pm ]
Post subject:  Re: My 1967 Honda S800

Sweeeeeet ride!

Quote:
I outsourced the refreshment. My garage space is not suited for a multi year project.
Off to Middletown New York
Who's restoring it, Paul? :D

Author:  foredeckape [ Mon Aug 06, 2012 4:28 pm ]
Post subject:  Re: My 1967 Honda S800

Professor Pineapple wrote:
Sweeeeeet ride!

Quote:
I outsourced the refreshment. My garage space is not suited for a multi year project.
Off to Middletown New York
Who's restoring it, Paul? :D

Formula H Motorsports
http://www.formulah.com/

Author:  freakytiki [ Fri Aug 10, 2012 9:02 am ]
Post subject:  Re: My 1967 Honda S800

that thing is super cool!!! i hope to be dragging a small (small in size, NOT in the work that has to be done) project home this weekend. hopefully it will be driveable to bring to the HRHH in 2013!!

Author:  foredeckape [ Thu Feb 14, 2013 4:16 pm ]
Post subject:  Re: My 1967 Honda S800

I got the call that the engine case is back from the machine shop and the head is close behind!

Time to order the gasket set from Germany and an exhaust system from England.

Author:  foredeckape [ Wed Mar 13, 2013 10:41 am ]
Post subject:  Re: My 1967 Honda S800

The excitment is mounting.

Packages of parts have arrived from Tokyo. The first round of boxes have left Germany. The gas tank and radiator are at the radiator shop.

I heard that the English built exhausts need rework to fit up right. If any of you gearheads have a line on shop with a mandral bender in the USA, I can use the lead.

All the hydraulics need to be rebuilt. I expect everything will need to be bored and sleeved. I found the replacement hoses in Germany. I hope the front brake rotors can be reused.

Here is what the cylinder sleves and engine case looked like after 30 years soaking in old fashioned anti freeze and tap water:
Attachment:
photo 1.JPG

Attachment:
photo 3.JPG

Author:  damion [ Wed Mar 13, 2013 12:38 pm ]
Post subject:  Re: My 1967 Honda S800

foredeckape wrote:

791 cc water cooled DOHC


I still can't believe, but love, that these engines were twin cam. :thumbsup:

Author:  foredeckape [ Wed Jan 13, 2016 9:40 pm ]
Post subject:  Re: My 1967 Honda S800

Since I am sure the Honda is the smallest car here, I thought I might also claim the longest. I just inherited a '94 Lincoln Town Car. It's going to make those trips to Ohanas like sitting on the sofa at home.

Uploaded via Tapatalk using flint and steel.

Author:  foredeckape [ Tue Nov 15, 2016 4:24 pm ]
Post subject:  Re: My 1967 Honda S800

There is a good possinlity that this ride will be on the road by spring!
Chasing down some carburetor parts here reminds me of my dad's search for a dashboard clock for his 1929 Pierce Arrow.

Author:  Tiki Rod [ Sat Dec 10, 2016 11:25 am ]
Post subject:  Re: My 1967 Honda S800

Any new pictures of the progress?

Author:  foredeckape [ Sat Dec 10, 2016 1:27 pm ]
Post subject:  Re: My 1967 Honda S800

I outsourced the mechanicals to a specialty shop near Velveteen Lounge, NY. I haven't seen it in spell. The slow progress is because of two factors: my thin pockets and parts for rare foreign cars are also rare.

The good news is the strong US dollar has helped.

Right now, the search is on for some internal carburetor parts. There might be a set in Canada.

It makes sourcing Alfa parts look like a trip to Autozone.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/